Fire Extinguishers

For over 60 years Susquehanna Fire Equipment Company has been providing
our customers with expertise in fire extinguisher sales and service.

Susquehanna Fire Equipment Company Fire Extinguishers

Fire extinguishers are one element of a fire response plan.

A portable fire extinguisher can save lives and property by putting out a small fire or containing it until the fire department arrives; but portable fire extinguishers have limitations. Because fire grows and spreads so rapidly, the number one priority for residents is to get out safely.

Call 800-822-2105 for more information.

Need Service, Testing or Training?
We’re Your Full Service Fire Extinguisher Vendor!

Amerex Fire Extinguishers

Amerex manufactures an extensive variety of hand portable and wheeled fire extinguishers, both “compliance” (code required) and “specialty” types.

“Specialty” type extinguishers are intended for use on particular types of hazards, so careful attention should be made to locating them in close proximity to the specific hazard they are meant to protect. It is natural for a person to use the extinguisher located nearest to a fire.

The most current issue of NFPA-10 should be consulted for minimum recommended fire extinguisher types, placement and travel distances.

Call Susquehanna Fire Equipment at 800-822-2105 to talk to one of our sales reps.

ABC-group-opt ABC or Multi-Purpose extinguishers utilize a specially fluidized and siliconized mono ammonium phosphate dry chemical. It chemically insulates Class A fires by melting at approximately 350°F and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires and will not conduct electricity back to the operator.

CO2group-opt CARBON DIOXIDE is discharged as a white cloud of “snow” which smothers a fire by eliminating oxygen. It is effective for Class B flammable liquids and is electrically non-conductive. Carbon Dioxide is a clean, non-contaminating, odorless gas.

 

RUGGED

  • Six-year warranty
  • Stored pressure design
  • Polished stainless steel cylinders
  • All-metal valve construction
  • Exclusive crevice-free, butt-welded cylinders
  • Temperature range from 40° F to 120° F

CLEAN

  • Leaves no powder residue

USER-FRIENDLY

  • Maximum visibility during discharge
  • Large loop stainless steel pull pin
  • Bar coded and bilingual labels

 

water-mist WATER MIST is the ultimate extinguisher for Class A fires and where a potential Class C (electrical) hazard exists. The fine spray from the unique misting nozzle provides safety from electrical shock, greatly enhances the cooling and soaking characteristics of the agent and reduces scattering of burning materials. The Amerex Water Mist extinguishers contain de-ionized water (sold separately) making them the best extinguishers for protection of hospital environments, valuable books and documents, telecommunication facilities and “clean room” manufacturing facilities. The Amerex WaterMist extinguishers are easy to use, maintain, and service.

Halotron HALOTRON 1 is a liquefied gas, pressurized with nitrogen, which discharges as a vapor causing no cold or static shock and no impairment of the operator’s vision. This “CLEAN” agent quickly penetrates difficult to see and hard to reach areas and leaves no residue. It is recommended for protection of delicate, sensitive and expensive computers, electrical equipment, tapes and film, automotive and aircraft engines, laboratory chemicals and equipment.

Class-D-Extinguisher MODEL B570 contains a special blended Sodium Chloride based dry powder extinguishing agent. Heat from the fire causes it to cake and form a crust excluding air and dissipating heat from burning metal. Metal fires involving magnesium, sodium, potassium and sodium-potassium alloys can be successfully extinguished with this extinguisher. There is data showing that zirconium, uranium, titanium, and powdered aluminum fires can be controlled and extinguished with this unique extinguisher.

Class-K-Extinguisher WET CHEMICAL extinguishers are the best restaurant kitchen appliance hand portable fire extinguishers you can purchase. Each model has been tested and approved for the Class K listing by UL specifically for restaurant kitchen hazards. They contain a special potassium acetate based agent. The recent trend to more efficient cooking appliances and use of vegetable based cooking oils dictates the use of a hand portable fire extinguisher with greater fire fighting capacity and cooling effect to combat these very hot and difficult fires. Available in two sizes – 6 liter or 2½ gal. – with attractive stainless steel cylinders and easy to use hose and spray application nozzle. The superior fire fighting capability of the Wet Chemical agent is placed exactly where you aim it with no chemical residue to clean up. The Models B260 and B262 are the ideal “KITCHEN USE” fire extinguishers. They supplement existing cooking equipment automatic system protection for an extra margin of safety.

 

amerex-foam-300x300 RUGGED

  • 5 Year Manufacturer’s Warranty
  • Stored Pressure Design
  • Polished Stainless Steel Cylinders
  • All Metal Valve Construction
  • Exclusive crevice free, butt welded cylinders
  • Temperature Range +40°F to 120°F

CLEAN

  • Leaves no powder residue

USER FRIENDLY

  • Maximum visibility during discharge
  • Large Loop Stainless Steel Pull Pin
  • Bar Coded and Bi-lingual Labels

 

amerex-wheeled-units-300x300 NITROGEN CYLINDER OPERATED The compact size and 16″ semi-pneumatic tires allow easy maneuvering and operation by one person, through narrow doorways and aisles. A 4″ stainless steel fill opening with rugged chrome plated brass cap makes servicing easier. For large hazards choose the 300 lb. ABC or Purple K or 350 lb. Regular Direct Pressure extinguishers with a “quick opening” 55 ft3 nitrogen cylinder. They provide quality and economical fire protection, large volume capacity for extra high hazard areas with single person transport and operation. The 36″ X 6″ wide steel wheels make movement possible in sandy or soft soil.

Ansul Fire Extinguishers

ANSUL® is a premium brand of Tyco Fire Suppression & Building Products.

The full line of ANSUL special hazard fire protection products includes fire extinguishers and hand line units; pre-engineered restaurant, vehicle, and industrial systems; sophisticated fire detection/suppression systems and a complete line of dry chemical, foam, and gaseous extinguishing agents.

SENTRY-Dry-Chemical-Extinguisher-Group When economy and performance are equally important, select from the SENTRY line of stored pressure, hand portable fire extinguishers. Designed for light to medium use, SENTRY extinguishers are available with dry chemical, carbon dioxide, or water. Typical applications… Auto repair shops, banks, electrical equipment rooms, hotels, machining operations, material handling vehicles, offices, schools, warehouses, and others.

The High Pressure Carbon Dioxide System is especially effective for non-occupied hazards. Personnel occupying areas protected by carbon dioxide systems must be evacuated prior to system discharge. Therefore, discharge time delays and alarms are mandatory for occupied hazards. Whatever the application, from cylinder to nozzle, each system can be custom-designed for specific fire hazards. High pressure systems use individual storage cylinders—from 35 lb. (16 kg) to 120 lb. (54 kg) capacity each—that can be manifolded together for rapid simultaneous discharge. Cylinder valves can be opened automatically or manually and either locally or remotely using electric, pneumatic or mechanical valve actuators.

SENTRY-Water-Extinguisher The ANSUL® Stainless Steel Water Extinguisher can be utilized in many Class A hazards such as office environments and industrial locations, as well as warehouse and oxidizing chemical storage areas. The unit features a stainless shell and chrome plated valve. The nameplate features easy to read step-by-step instructions for operating the extinguisher. The Schrader valve allows for easy recharge in the field.

CLEANGUARD-FE-36-Extinguisher-Group ANSUL® CLEANGUARD hand portable extinguishers contain DuPont FE-36® where the agent must be clean, electrically non-conductive, environment friendly, extremely low in toxicity, and exceptionally effective. Typical applications… computer centers, data/document storage areas, communications facilities, control rooms, electronics manufacturing, museums, art galleries, laboratories, and many others. NEW CLEANGUARD Non-Magnetic Model now available for MRI rooms, operating rooms and other similar applications.

kguard ANSUL® K-GUARD fire extinguishers contain ANSULEX® liquid fire suppressant to quickly knock down the flames, form a vapor-securing blanket, and cool the grease and surrounding surfaces. Listed by UL and ULC for “K” class fires. Typical applications… restaurants, convenience stores, food courts, cafeterias, and many others.

RED-LINE-Mixed-Portable-Group ANSUL® RED LINE cartridge-operated extinguishers are the premium firefighting units preferred by safety directors in high fire-risk industries. Cartridge-operated means increased reliability, on-the-spot recharge and ease of service. Typical applications… fuel loading racks, heavy construction sites, dip tanks, oil pumping stations, mining equipment, paint lockers, trucks and buses, fuel storage rooms, production lines, and others.

red_line_wheeled_dry_chem RED LINE Wheeled dry chemical fire extinguishers are made specifically to protect people and property in areas where the potential for large-scale fires is always present. Airports, loading docks, steel and iron mills, paint spray booths, dip and quench tanks, offshore platforms, loading racks, fuel storage, and heavy manufacturing areas benefit from the protection offered by these industrial high-hazard fire extinguishers. red_line_wheeled_carbon_dioxide RED LINE Carbon Dioxide Wheeled Fire Extinguishers are designed to protect areas where Class B (flammable liquids and gases) or Class C (energized electrical equipment) fires could occur. They may be used indoors where winds and drafts do not affect discharge or where a clean extinguishing agent is required. These extinguishers provide maximum protection in settings such as aircraft hangars, paint spray booths, quench tanks, and metal tube manufacturing.

Fire Extinguisher Safety Tips

  • Use a portable fire extinguisher when the fire is confined to a small area, such as a wastebasket, and is not growing; everyone has exited the building; the fire department has been called or is being called; and the room is not filled with smoke.
  • To operate a fire extinguisher, remember the word PASS: – Pull the pin. Hold the extinguisher with the nozzle pointing away from you, and release the locking mechanism. – Aim low. Point the extinguisher at the base of the fire. – Squeeze the lever slowly and evenly. – Sweep the nozzle from side-to-side.
  • For the home, select a multi-purpose extinguisher (can be used on all types of home fires) that is large enough to put out a small fire, but not so heavy as to be difficult to handle.
  • Choose a fire extinguisher that carries the label of an independent testing laboratory.
  • Read the instructions that come with the fire extinguisher and become familiar with its parts and operation before a fire breaks out. Local fire departments or fire equipment distributors often offer hands-on fire extinguisher trainings.
  • Install fire extinguishers close to an exit and keep your back to a clear exit when you use the device so you can make an easy escape if the fire cannot be controlled. If the room fills with smoke, leave immediately.
  • Know when to go. Fire extinguishers are one element of a fire response plan, but the primary element is safe escape. Every household should have a home fire escape plan and working smoke alarms.